SIGLENT SDS1000D Manual do Utilizador descarregar pdf (Página 16)

indicates the filter is On.

11. Readout shows the main time base setting.

12.

Readout shows the horizontal positon of main timebase waveform.

13. Icon shows the trigger type.

14.Display real time and date.

15. Readout shows the trigger voltage.

16. Readout shows trigger signal frequency.

1.2 Function checking

When you check whether or not the oscilloscope could work smoothly, please operate as

following:

1. Power On the oscilloscope.

Press “DEFAULT SETUP” to show the result of the self check. The probe default

attenuation is 1X.

Picture 1.2- 1

2. Set the switch to 1X on the probe and connect the probe to channel 1 on the

oscilloscope. To do this, align the slot in the probe connector with the key on the CH 1

BNC, push to connect, and twist to the right to lock the probe in place. Connect the probe

tip and reference lead to the PROBE COMP connectors

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 153 154

Sem comentários

SIGLENT SDS1000D Manual do Utilizador Página 16