SIGLENT SDS1000D Manual do Utilizador descarregar pdf (Página 97)

the oscilloscope has initialized USB flash drive (about five seconds).

5） Press the “Save to” option button to select “File”.

6） Press the “Save” option button then you’ll go into the Save/Recall

interface.

7） Create a file then press the “Confirm”button(about five seconds, there is a

prompting message that “Save data success” displaying on the screen), now

waveform data have been saved to USB flash drive

Recall waveforms form USB flash drive, follow next steps:

1）. Press the “SAVE/RECALL” button.

2）. Press the “Type” button to select “Waveforms”.

3）. Insert USB flash drive to USB host port of the oscilloscope and wait that

the oscilloscope has initialized USB flash drive (about five seconds).

4）. Press the “Save to” option button to select “File”.

5）. Press the “Save” option button then go into the Save/Recall interface.

6）. Choose the file you want then press the “Load” option button (about five

seconds, there is a prompting message that “Recall data success” displaying

on the screen), now waveform data have been recalled from USB flash drive.

■

Save Picture

Waveform interface image can be saved to USB flash drive, but they can’t be recalled.

You can open them on correlative computer software.

Table 2-46 Picture storage function menu:

Option Setting Introduction

Type Pictures Menu for the Storage/Recall

waveform interface image.

Print Picture When the oscilloscope connect to

the printer and “Back USB” option is

set to “Printer”, select “Print Picture”

and press the “PRINT” button to

print the screen image.

Print Key

Save Picture

When the USB flash drive insert to

the USB Host interface(now the

USB flash drive open status icon

displays on the top of the screen),

select “Save picture” and press the

“Save” knob to go into the

Save/Recall interface.

Save Go to the Save/Recall interface.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 153 154

Sem comentários

SIGLENT SDS1000D Manual do Utilizador Página 97